Step up 2 inch body for Mitsubishi L200 Triton offroad

Step easy lift up 2 inch body for Mitsubishi L200 Triton offroad.
      Today I will share method lift up 2 inch body for Mitsubishi L200 Triton with lift up body kit set high 2 inch. Those include two piece support rear spring thick 2 inch, two piece support front shock absorber thick 1 inch, spacer for ball joint upper arm and Amada Xtreme shock absorber full length 24" .

After up body 2" with Tyre Maxxis Buckshot Mudder 245/75/R16

    For front shock absorber insert support thick 1" above spring. They can lift up body to 2".  But I must front wheel alignment check and adjustment again.

Insert support thick 1" above spring

    Ball joint must support by spacer thick 1" too. Because when body lift up this point will drop down.

Spacer for ball joint upper arm

     Rear section will add support between shaft and rear spring. The support thick 2" and change U-Bolt length 18".

Insert piece support between rear spring

    And change shock absorber full length 24" brand Amada xtreme 20 mm core.

 Amada xtreme 20 mm core

     They can lift up body higher than standard 2" or 25.4 mm. 

After completed with lift up set

Thank you for reading my blog. If you have any question please comment.